White Tyrolien

Description

TYROLIEN plaster decorative coating to be applied to walls and facades using a plastering machine (tyrolean) by projecting the coating onto the exterior or interior surfaces of the house. The Tyrolien coating is a ready-to-mix coating, very easy to apply, available in several colors, and allows for “speckled” finishes

APPLICATION

The steps for applying the product are as follows:
1- Dilute the 25 kg bag in 15 L of clean water.
2- Mix until you obtain a lump-free paste.
3- Clean the application area, dust and remove any traces of oil
or grease.
4- Apply the mixture in 2 or 3 successive layers from top to bottom
until you obtain a thickness of approximately 3 mm.
– It is preferable to moisten the support before application.
The treated surfaces can remain raw or covered with any type of paint.
The crushed appearance will be obtained by passing the trowel over the relief of the grain

TECHNICAL DATA


Particle size	1 mm
Density	1.5 Kg/m³ of water
Compressive strength	CS III
Water absorption by capillary action	W1
Mixing water	between 35% and 40%
Maximum application thickness	unlimited
Yield	1 kg/m² thickness 3mm
Drying time	Between 18-24 h
Operating temperature	Between 5°C and 35°C
Collection times	24 heures
Reaction to fire	Class A1: non-combustible